The new WanRaptor™ Network Emulator is an easy to use, economical test solution to validate your applications in a lab environment by emulating bandwidth, latency, loss and jitter of wide area networks. With the purchase of the WanRaptor™ you receive a COTS hardware system with embedded software supporting network emulation on 10/100/1000, 10G, 25G and 40G optional interfaces.
Read more ...
The PDS-1G or PDS-10G is a mini low cost Portable Delay Simulator allowing users to test critical network equipment by altering bandwidth, latency, packet loss, random duplication and re-ordering for network impairment testing over 10/100/1000 or 10GbE Ethernet.
Read more ...
BGP Network Emulator. The Border Gateway Protocol or BGP is at the core of the modern Internet. Large corporate and government enterprise networks are increasing their use of BGP to interconnect different administrative and country specific regions.
Read more ...
The RDS-PLUS is a modular, network link error and delay simulator that provides a realistic simulation of physical network behavior with respect to time delays and bit errors. The RDS-PLUS supports a wide range of interface types and speeds, ranging from 1200bps to over 50Mbps.
Read more ...
The EDS-1G is an network emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000 copper or fiber Ethernet. A WAN Emulator or Satsim is excellent for network impairment testing
Read more ...
The V.35/X.21 Breakout Box provides access to all V.35 or X.21 conductors when inserted between a Modem and Terminal device. The LED's monitor the status of all signals. The DIP SWITCHES allow the user to break contact of individual signals. Test points allow cross patching of signals. When using a Breakout Box, the interpretation of the LEDS can at times be misleading. Many short term events, are undetected by a very brief flash of an LED. Also, constant events such as clocks or constant data may only be a faint glow on the LED. The V.35 Breakout Box contains circuitry to help alleviate this problem.
Read more ...
For testing network transmission delays. The UDC-RDS Network Delay Simulator allows connections at data rates of 8kbps up to 3.072Mbps while simulating network latency. The user selectable delays are for both data and control signals and range from 0 milliseconds up to 1 second in each direction. The WAN Delay Simulator allows users to test and pre-configure Routers (with software applications)and other critical DTE equipment for reliable network operation while simulating network delay times.
Read more ...
Serial Data Link Delay Emulator. The UDC-RDS Network Delay Emulator allows connections at data rates of 300bps up to 1.024Mbps while simulating network latency. The user selectable delays are for both data and control signals and range from 0 milliseconds up to 1 second in each direction. The WAN Delay Simulator allows users to test and pre-configure Routers (with software applications)and other critical DTE equipment for reliable network operation while simulating network delay times
Read more ...
The Data Test Set (DTS) provides a means for a technician at a remote site to implement a full external loopback at the terminal port of a DSU or modem and to obtain visual indication of the circuit operation.
Read more ...
RS-530 Data Line Monitor
The RS-530 Line Monitor product provides a means for a technician to easily monitor the status of RS-530 TXD and RXD on a data only RS-530 circuit..
Read more ...