UDC-RA

The UDC-RA Rate Adapter allows low speed async or sync RS-232 data terminal equipment(DTE) to transmit over a higher speed 16k, 64k or 128k sync data communication quipment(DCE) link. Additionally, the unit supports matched data rates for basic Async to Sync conversion such as 19.2k async over sync 19.2k. The UDC-RA devices are used in pairs, one at each end of the communications link or in multiples as when used in a multi-point or broadcast link. The UDC-RA will support bi-directional or simplex data transmissions.

RA-64/128K_V35-AC

The RA-64/128K Rate Adapter allows low speed async or sync RS-232 DTE equipment to transmit over a high speed 64K or 128k V.35 sync communications link. The unit supports forced control signals and RTS in-band to either DCD, CTS or DSR. The RA-64/128k will support bi-directional or simplex data transmissions.

Sync2IP

The Sync2IP is a device that transports serial communications over a TCP/IP network. It converts a full duplex Sync or Async serial data stream to a TCP/IP packet stream.

ASC-232 / V.11

This converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface.

RA-64/128K

The RA-64/128K Rate Adapter allows low speed async RS-232 DTE equipment to transmit over a high speed 64K or 128k sync communications link. The RA-64/128k will support bi-directional or simplex data transmissions.

SV11-AV24

The SV11-AV24 allows simplex 9600bps synchronous 8-bit data to be transmitted to asynchronous 19.2kbps data terminal equipment (DTE). The synchronous data interfaces supported are RS-422/449, V.35 and RS-530. The asynchronous data interface is RS-232.

The ASC-232 Async to Sync Converter is designed to allow async terminal equipment to transmit over higher speed sync modems. The device is autobaud at data rates up to 38.4Kbps and is line powered.

ASC-422

This converter allows Asynchronous RS-232 DTE equipment to communicate over Synchronous RS-530 or RS-422/449 DCE equipment. The product was developed especially for government and secure encrypted Modems utilized by a Gretacoder that has an existing RS-422/V.11 electrical interface.