|
 |
RDS
ROUTER DELAY SIMULATOR
|
FEATURES/BENEFITS
- * Interfaces supported: RS-232, V.35, X.21, RS-422, RS-530,
TTL and HSSI
-
- * Network Simulation delays of 5mS up to 1250mS in 5mS
increments
-
- * Data Rates
- Synchronous to 2.048Mbps
- Option for T2 (6.312Mbps)
-
- * Controls for RTS/CTS delay, DSR, DTR on a per port basis
-
- * Status LED's for each port allows ease of connection
and trouble shooting
-
- * Timing - Internal or accepts external timing from DTE
for test purposes
-
- * 110/220VAC switch selectable
-
- * Sturdy Metal Enclosure
|
. |
DESCRIPTION
The Router Delay Simulator (RDS) allows Router-to-Router
connections at data rates up to 2.048Mbps while simulating
network delays.. The user selectable delays are for both data
and control signals and range from 5 milliseconds(mS) to approximately
1250 mS, in 5 mS increments. The RDS allows users to test
and pre-configure Routers (with software applications)and
other critical DTE equipment for reliable network operation
while simulating network delay times.
The RDS has individual data interfaces that allow HSSI,V.35,
RS-530, RS-422/449, RS-232, X.21 and TTL serial connections.
The data interfaces may also be mix and matched such as V.35-to-RS-530
connection.
Installation is fast and simple by setting the external switches
for Delay Simulation, Clocking, Carrier Operation and RTS
to CTS delay. All clocking and signal crossover are provided
within the RDS.
The RDS has status LED's for each attached DTE device which
allows the user to visually confirm the presence of control
signals.
The RDS utilizes state of the art digital CMOS technology
to provide a feature filled product at a very affordable price.
Our Field Programmable Gate Array (FPGA) design has allowed
us to offer this product with a wide selection of user Delay
Settings and Baud Rates.
The RDS is housed in a sturdy standalone or rackmount metal
enclosure and operates on 110/220VAC.
The RDS has a three year warranty and a 24 hour turnaround
on warranty repairs.
|
|
SPECIFICATIONS
ARE SUBJECT
TO CHANGE
WITHOUT NOTICE
For further detailed
technical information
on this product,
contact East Coast
Datacom Technical
Assistance at
(321) 637-9922
or fax us at
(321) 637-9980
OTHER EAST COAST DATACOM PRODUCTS
MODEM AND PORT SHARING DEVICES
INTERFACE CONVERTERS
SIGNAL REGENERATORS
LINE DRIVERS
|
SPECIFICATIONS
| Application |
Interconnection of two Routers
or DTE (Terminal) devices located within proximity of
each other while simulating network delays times |
| Simulation Delay Times |
5 milliseconds(mS) to approximately
1250 mS, in 5 mS increments
|
| Capacity |
Two (2) Routers or DTE's |
| Data Rates |
Up to 2.048Mbps
Option for T2 (6.312Mbit)
|
| Data Channel Interfaces |
Available in V.35, RS-530,
RS-422/449, RS-232, X.21, TTL and HSSI |
| Surge Protection |
Main power supply |
| Power Source |
100-120 to 200-220VAC @10%,
50/60Hz, 0.16/0.08A, external 110/220 volt select switch,
IEC Power Inlet, (2) 5mm Fuses |
| Environmental |
Operating Temperature....32º
to 122º F (0º to 50º C)
Relative Humidity.............5 to 95% Non-Condensing
Altitude............................0 to 10,000 feet
|
| Dimensions |
Height ....... 1.75 inches
(4.44 cm)
Width ........ 7.90 inches (20.07 cm)
Length ....... 9.00 inches (22.86 cm)
|
| Weight |
2 pounds (0.914Kg) |
| Warranty |
Three Years, Return to Factory |
| Ordering Information |
Part #: 129000
Model: RDS
Description: Router Delay Simulator
Interfaces Available:
| Part #: |
|
| 129014 |
RS-232 DCE I/M
|
| 129032 |
RS-232 DTE I/M
|
| 129010 |
V.35 DCE I/M
|
| 129028 |
V.35 DTE I/M
|
| 129011 |
RS-530 DCE I/M
|
| 129029 |
RS-530 DTE I/M
|
| 129012 |
RS-422 DCE I/M
|
| 129030 |
RS-422 DTE I/M
|
| 129013 |
X.21 DCE I/M
|
| 129031 |
X.21 DTE I/M
|
| 129057 |
TTL I/M
|
| 151028 |
HSSI I/M
|
|
| Included with each unit: |
1) Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015
|
|
|
|
|
|
|
