UDC-IC, 10 Mhz Sine Wave to Square Wave Interface Converter

The UDC-IC 10 MHz Clock Converter is intended to accept a standard 10 MHz sinusoidal reference signal, convert it to a typical 5V TTL-level output, and distribute this output to 4 separate devices over individual coax cables.

UDC-IC, Interface Converter

The UDC-IC Interface Converter allows the user to purchase a single product to convert interfaces between any combination of RS-232, RS-422/449, RS-530, V.35, X.21, HSSI, RS-485, TTL and Current Loop. The unit supports data rates up to 10Mbps. The UDC-IC has two TTL level interfaces for connecting each data interface. The unit is shipped with any two user specified data interfaces included in the price. Additional data interfaces are sold separately. The individual data interfaces are available in DCE or DTE formats. Each data interface has the ability to force commonly used control signals such as RTS, CTS, DSR, DTR, Ring Indicate, Control and Indicate.

UDC-IC, RS-232 to V.35 Interface Converter

The UDC-IC RS-232 to V.35 converter is a cost effective solution for interconnection of RS-232 and V.35 devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to RS-530 Interface Converter

The UDC-IC RS-232 to RS-530 converter is a cost effective solution for interconnection of RS-232 and RS-530 devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to RS-422/449 Interface Converter

The UDC-IC RS-232 to RS-422/449 converter is a cost effective solution for interconnection of RS-232 and RS-422 devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to X.21 Interface Converter

The UDC-IC RS-232 to X.21 converter is a cost effective solution for interconnection of RS-232 and X.21 devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to TTL Interface Converter

The UDC-IC RS-232 to TTL converter is a cost effective solution for interconnection of RS-232 and TTL devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to RS-485 Interface Converter

The UDC-IC RS-232 to RS-485 converter is a cost effective solution for interconnection of RS-232 and RS-485 devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

UDC-IC, RS-232 to Current Loop Interface Converter

The UDC-IC RS-232 to Current Loop converter is a cost effective solution for interconnection of RS-232 and Current Loop devices located in proximity of each other. The unit provides signal level and physical connector conversion of user equipment. The unit supports data rates up to 128Kbps. Internal power supply operates on 110/220VAC or optional internal 48 volt DC supply.

232-V35

The 232-V35 Interface Converter is designed to provide signal level conversion between RS-232 Modems and V.35 DTE equipment.

V35-530 (Obsolete: Replaced by UDC-IC V35 to RS-530)

The V35-530 Interface Converter is designed to provide signal level conversion between V.35 Modems and RS-530 DTE equipment.

V35-X21

The V35-X21 Interface Converter is designed to provide signal level conversion between V.35 Modems and X.21 DTE equipment.

The V35-V36 Interface Converter is designed to provide signal level conversion between V.35 Modems and V.36(RS-422/449) DTE equipment.

232-X21

The 232-X21 Interface Converter is designed to provide signal level conversion between RS-232 Modems and X.21 DTE equipment.

TTL-530

This converter allows TTL signals (Data and Clock) to be transmitted via RS-530 (or any V.11 interface). TTL voltage levels are converted to the balanced V.11 specification. Data rates in excess of 10Mbps are possible. Two converters per rackmount chassis are provided, as well as Transmit and Receive TTL levels for loopback testing. This product was developed for satellite communication systems used by the US Government.

V35-232

The V35-232 Interface Converter is designed to provide signal level conversion between V.35 DCE (Modem) equipment and RS-232 DTE (Terminal equipment).