FEATURES/BENEFITS
- * Interface - RS-232, DB-25 Male (To DTE) and RS-449/RS-530
Female DB-25 (To DCE)
* Data Rates - Synchronous to 38.4bps and supports 3/4 baud
rates
* Synchronous data rates are automatically adjusted
* Ac Mains Powered, 110 / 220 VAC Switch Selectable
* Switch selectable - 8 to 11 bits
* CCITT V.14 and V.22 compliant
* Supports full and half duplex operation
* Compact and Easy To Install
|
. |
DESCRIPTION
The ASC-232 / V.11 Async to Sync Converter is designed to
allow RS-232 async terminal equipment to transmit over higher
speed V.11 compliant sync modems. The ASC-232 / V.11 devices
are used in pairs, one at each end of the communication link
or in multiples as when used in a multi-drop communication
link.
The ASC-232 / V.11 supports async data of 8, 9, 10 and 11
bits, including the start and stop bit. Standard data rates
from 1200 to 38.4bps and 3/4 rates of 900 to 28.8bps are supported
for synchronous transmission. The ASC-232 / V.11 automatically
adjusts the sync data rate to match the DTE’s output
rate, no data rate strapping is required.
Stop bit reduction is provided when the async data rate is
faster than the sync data rate, ensuring reliable data communications.
The ASC-232 / V.11 has convenient front panel LED’s for
control signal status. AC mains power supply allows the data
interface signals to drive longer distances than interface
powered devices.
The ASC-232 / V.11 is housed in a sturdy metal enclosure and
will provide in excess of 100,000 hours of reliable service.
The unit is AC mains powered and is switch selectable for
110 / 220 VAC.
The ASC-232 / V.11 has a three year warranty and a 24 hour
turnaround on warranty repairs.
|
