 |
UDC-ME
V.36
MODEM
ELIMINATOR
|
FEATURES/BENEFITS
• Interface - ITU V.36, RS-422/449, V.11 compliant with DB-37 Female Connectors
• Data Rates - 1.2k to 3.072M - 32 Selectable Rates
• Serial Data Interface cards are Interchangeable and may be mixed
such as RS-422 to RS-232
• Controls for RTS/CTS delay, DSR, DTR on a per port basis
• Timing - Internal
• Status LED’s for each and Signal
• 110/220VAC switch selectable or DC Power for -48VDC
• UL, CSA and CE Approved, RoHS
• Sturdy Metal Aluminum Enclosure |
. |
DESCRIPTION
The UDC-ME V.36 modem eliminator allows two DTE devices (such
as routers) to communicate within proximity of each other. The
UDC-ME transmits data bi-directionally at clock rates of 1.2k
up to 3.072Mbps between DTE devices. All clocking and signal
crossover are provided within the UDC-ME. The unit is equipped
with two interface slots that allow a host of serial interface
cards to be utilized. The serial interface cards available are
RS-232, RS-422/449, RS-530, X.21, V.35 and HSSI. The Serial Interface
cards are interchangeable and may be mixed such as RS-232 to
V.35 thus eliminating the need for an interface converter or
changing expensive serial cards on a DTE device such as a router.
The UDC-ME V.36 modem eliminator
is also an excellent choice
for testing router-to-router
connections via the serial
ports. The unit is an excellent
choice for interconnecting
your LAN or legacy mainframe
equipment.
Installation is fast and
simple by setting the internal
switches for Clocking, Carrier
Operation and RTS to CTS
delay. The UDC-ME has status
LED's for each attached DTE
device which allows the user
to visually confirm the presence
of clock and control signals.
The UDC-ME utilizes state
of the art digital CMOS technology
to provide a feature filled
product at a very affordable
price. Our Field Programmable
Gate Array (FPGA) design
has allowed us to offer this
product with a wide selection
of clock rates. This design
approach has also reduced
the amount of clock jitter
for high speed transmissions.
The UDC-ME is housed in
a sturdy metal enclosure
and operates on 110/220VAC
or optional -48V DC power.
Typical MTBF figures are
in excess of 150,000 hours
of operation.
The UDC-ME has a three year
warranty and a 24 hour turnaround
on warranty repairs.
|
|
SPECIFICATIONS
ARE SUBJECT
TO CHANGE
WITHOUT NOTICE
For further detailed
technical information
on this product,
contact East Coast
Datacom Technical
Assistance at
(321) 637-9922
or fax us at
(321) 637-9980
|
SPECIFICATIONS
| Application |
Interconnection of
two DTE (Terminal) devices located within proximity of each
other |
Capacity
|
Two (2) DTE’s |
| Serial Data Interface |
ITU V.36 RS-422/449,
X.21 or RS-232, RS-530, V.35 and HSSI |
| Data Format
|
Data Transparent at all Data Rates |
| Data Rates |
1.2k, 2.4k, 4.8k,
7.2k, 9.6k, 14.4k, 16k, 19.2k, 28.8k, 32k, 38.4k, 48k, 56k,
57.6k, 64k, 72k, 96k, 128k, 192k, 256k, 384k, 512k, 768k,
1.024M, 1.280M, 1.472M, 1.536M, 1.544M, 1.920M, 1.984M, 2.048M,
3.072M |
| Indicators
|
POWER
TXD, RXD, TXC,
RXC, RTS, CTS, DTR, DCD |
| Surge Protection |
Main power supply |
| Power Source |
AC Mains: 100-120 to 200-220VAC @10%, 50/60Hz, 0.16/0.08A, external 110/220 volt select switch, IEC
Power Inlet, (2) 5mm Fuses
DC Mains: DC Voltage, Input Range of -36 to -72vdc
Current Draw at 48vdc: 75ma @ 3.6watts |
| Environmental |
Operating Temperature....32º
to 122º F (0º to 50º C)
Relative Humidity.............5 to 95%
Non-Condensing
Altitude............................0 to 10,000 feet |
| Dimensions |
Height ....... 1.75 inches (4.44 cm)
Width ........ 9.00 inches (20.86 cm)
Length ...... 9.00 inches (20.86 cm) |
| Weight |
2 pounds (0.914Kg |
| Warranty |
Three Years,
Return To Factory |
Ordering Information
|
Main Unit Part Number: 189000 Model: UDC-ME
Description: UDC
Modem Eliminator
Serial Interface Cards, Two Cards Required Per UDC-ME,
pick any two cards, may be the same card twice or any combination.
|
| Included with
each unit: |
1) Operations Manual
2) U.S.A. Grounded Power Cord, Part # 713015
3) Optional Power Cords
A) United Kingdom, Part # 713016
B) Continental Europe, Part # 713017
C) Other: Specify Country on Purchase Order |
| Optional Accessories |
1) Spare Data Center Fuses
A) 160ma Fuse, Qty (2) Part # 714000
B) 80ma Fuse, Qty (2) Part # 714001 |
NETWORK LATENCY SIMULATORS
MODEM AND PORT SHARING
DEVICES
INTERFACE CONVERTERS
SIGNAL REGENERATORS
LINE DRIVERS |
|
|
|
|
